What is IoT Power Management: EDRX vs PSM?

EDRX (Extended Discontinuous Reception) and PSM (Power Saving Mode) are two features designed to minimize power consumption and prolong battery life for devices using LPWA (Low Power Wide) technologies area), such as NB-IOT and LTE-M.

Continue reading to see how these two IoT energy management features work, their similarities, differences and suitability to a variety of business IoT use cases.

What is eDRX?

Devices on a network often need to listen to network notifications and send tracking information at regular intervals. As a rule, to keep battery consumption to a minimum, it is better for the device to remain in idle mode for as long as possible, waking up periodically to report to the network and check for data pending for it.

LTE networks usually provide an energy-saving feature called Discontinuous Reception (DRX). This allows devices to frequently interrupt data reception and enter sleep mode for very short periods (usually 1 to 2 seconds).

DRX works well for smartphones. However, many IoT devices do not need to be as accessible or transmit data much less frequently than a phone. Extended DRX (EDRX) is a variation of this principle, allowing an IoT device to remain in low power sleep mode for a longer time.

With the DRX, the network provider decides how long the devices remain in sleep mode. On the other hand, with EDRX, the duration of the suspension cycle can be configured by the device owner or the application developer, although the networks have the final word on the allowed timers. This gives developers greater flexibility to balance the device's responsiveness with energy consumption, according to the needs of specific use cases.

During an EDRX cycle, the device cannot receive data sent to it. This data is delivered only when the device is activated. When you wake up, the device can listen to pending data without having to establish a new network connection, which also contributes to energy savings.

What is PSM?

PSM (Power Saving Mode) is a feature of the LPWA networks that allows the device to remain suspended for even longer periods than with EDRX.

The duration of the PSM period is negotiated between the network provider and the device software. Typically, networks allow a minimum sleep time of 4 hours and a maximum of up to 413 days. In PSM mode, the device remains registered on the network, but does not transmit or receive data. Packets sent during this time are stored over the network and delivered when the device is activated. After leaving the PSM, the device remains active for a period previously negotiated with the network.

During the PSM cycle, the device consumes significantly less energy than in suspension with EDRX. However, when you wake up, you need to stay active longer (about 100 to 200 milliseconds) than a device that leaves the EDRX in order to exchange control messages with the network before receiving data. To maximize energy savings, EDRX can be used in conjunction with PSM, reducing uptime after PSM output.

Design and tests are important when using PSM or EDRX. Users will need to balance the length of battery life and device availability.

What are the main use cases of EDRX technology?

For devices that use LTE-M networks, the minimum EDRX cycle can be only 5.12 seconds, with maximum values of up to 43 minutes.

For devices on NB-IoT networks, the minimum suspension time can be only 10.24 milliseconds, with a maximum of approximately three hours.

The EDRX is a good power-saving option for devices where it is necessary to preserve the battery, but still keep the device accessible during the day, either every few seconds or at intervals of a few hours.

Examples of use cases include:

  • Asset trackers for logistics
  • industrial performance monitoring systems
  • smart network technologies

One of the main advantages of EDRX is the possibility of adjusting the suspension cycles according to the app's owner's preferences. For example, on a production line performance monitor, the cycle can be a few minutes during the operation and extended to several hours in the downtime.

What are the main use cases of PSM technology?

PSM suspension cycles are significantly longer than those of EDRX. This makes PSM a good power-saving option when it is acceptable for the device to remain inaccessible during the day.

Examples of use cases include:

  • Water, soil, or pressure monitoring sensors, where the data needs to be transmitted only once or twice a day.

 

For more explanations about IoT, visit our glossary.