What is a 4G network?

4G refers to the fourth generation of mobile telecommunications technology. In its early days, it consisted of two main branches of technology: WiMAX (Worldwide Interoperability for Microwave Access) and LTE (Long-Term Evolution). In turn, the LTE opened the doors to LTE-M, a type of low-powered, low-power network solution (LPWAN) that proved to be particularly effective for business applications, including IoT projects.

Here is a more detailed analysis of this generation of cellular networks and how they can benefit your business.

The History of 4G

From the early 2000s onwards, mobile phone operators began using the '4G' label to describe a number of technologies and services. The industry needed clarity about what that meant.

In 2008, the International Telecommunications Union (ITU) set its standards for 4G connectivity, which all services should serve if they wanted to describe themselves as 4G. For mobile devices, this meant that connection speeds needed to have a peak of at least 100 megabits per second and, for stationary uses, at least 1 Gigabit per second. In 2008, these speeds were still not practically achievable; They were more designed as a target for developers to crave.

At that time, a technology called WiMAX was a true candidate to become the dominant 4G connectivity solution. Sometimes dubbed "wi-fi with steroids", WiMAX operated with the same principles of long-range Wi-Fi, with the potential to replace traditional landline phones and the mobile Internet.

For various practical and costly reasons, however, most carriers have decided not to invest in completely new WiMAX networks. Instead, they chose to adopt LTE, which essentially involved an upgrade to existing network technology rather than an entirely new infrastructure.

The first iteration of LTE was not created with the use of IoT in mind. Power consumption was about 50% higher than 3G technologies. It also uses a lot more frequency bands than 3G and 2G, which can mean you need multiple modems to deploy it globally.

However, in recent years, LTE has given rise to evolved technologies designed for industrial, commercial and consumer-focused IoT projects:

  • LTE CAT M or LTE-M (long-term evolution for machines)
  • LTE Cat NB or NB-IoT (Narrowband IoT)
  • lte cat 1

Both LTE-M and NB-IOT require up-to-date network infrastructure, while LTE Cat 1 does not. LTE Cat 1 can operate on the original 4G LTE networks.

4G and particularly the IoT-focused variants known as LTE-M offer the following:

  • Performance:

The LTE Cat 6 has improved latency and bit rate (or speed) to 300 Mbps compared to the 150 Mbps that the LTE Cat 4 has offered. While this performance has a significant benefit for users of smartphones or tablets and apps based on gateway or LTE router, it is not a real benefit for most IoT applications. The impact on power consumption and therefore battery life of the LTE Cat 6 is detrimental to IoT.

LTE has also evolved at the lower end of the performance spectrum, making LTE more suitable than ever for IoT, even when there are long-lasting battery requirements.

LTE Cat 1 provides 10 Mbps downlink speeds and 5 Mbps uplink.

LTE-M offers typical uplink and downlink speeds of 375 kbps, with the potential to reach a peak of 1 Mbps. The latency would normally be on the order of 100 ms.

The NB-IoT has been deliberately designed to perform poorer performance and can deliver uplink speeds below 100 kbps (below 30 kps in downlink). The latency would normally be on the order of 1s.

When selecting which technology is most suitable, it will be necessary to balance the requirements of performance, coverage (internal and external), mobility and battery life.

  • energy saving:

The power saving mode is incredibly useful where devices don't need to be contacted between sending messages. You can configure your devices to go into hibernation, but they can still keep the network up to date with status updates. LTE and NB-IOT support these types of features.

LTE has also evolved at the lower end of the performance spectrum, making LTE more suitable than ever for IoT, even when there are long-lasting battery requirements.

  • Coverage:

LTE-M and NB-IOT offer better reach and better penetration not only in buildings but also in underground and semi-underground locations.

How is 4G used in IoT?

The standard 4G protocol (LTE) provides a useful connectivity option when you need high data transfer rate. The main examples include security systems that incorporate video streaming and analysis or have machine vision requirements, augmented reality (AR) or artificial intelligence (AI).

However, for IoT use cases with less hunger for data, there are more appropriate options.

Not least, the ability to extend battery life by entering the sleep mode is ideal for machines in hard-to-reach places where high calling costs apply.

The NB-IOT is suitable for large-scale deployments of stationary devices with lower data requirements; For example, utilities, some conditions monitoring applications and environmental sensors.

Higher speed, lower latency and mobility features make the LTE-M a good choice for a wide range of applications, including emergency equipment (e.g. elevators and remote assistance equipment, solutions for solitary workers, asset tracking and more).

LTE CAT 1 works well when IoT devices have a power source or battery recharge regimes around them that do not add general expenses or harm the user experience; For example, micromobility, wearables of consumption, M2M gateways and more.

Offering a range of solutions with performance options, coverage, low maintenance and cost-effectiveness, 4G LTE technologies offer IoT options.

For more explanations about IoT, visit our glossary.