What are SIM form factors?

Subscriber Identity Modules (SIMs) are manufactured in a variety of standardized sizes, known as form factors. The five SIM form factors are 1FF (the largest), 2FF, 3FF, 4FF, and MFF2 (the smallest).

The form factors

  • 1FF (Full Size)

Size: 85.6 mm x 53.98 mm x 0.76 mm

With dimensions similar to a credit card, this form factor is no longer used in modern devices. You're likely only to find it in legacy equipment.

  • 2FF (Mini)

Size: 25 mm x 15 mm x 0.76 mm

Until the introduction of 3FF and 4FF SIMs in 2010 and 2012, respectively, the Mini SIM was the industry standard format for almost a decade. Although its use has declined, it is still found in various devices; particularly larger industrial and commercial equipment (e.g., vending machines) and fleet tracking devices.

  • 3FF (Micro)

Size: 15 mm x 12 mm x 0.76 mm

The Micro SIM was first widely used when it was incorporated into Apple's original iPad. Common applications include portable industrial equipment, tablets, and health monitors.

  • 4FF (Nano)

Size: 12.3 mm x 8.8 mm x 0.67 mm

The Nano SIM is not only smaller but also thinner than its predecessors. The design also incorporates a ring around the contact area to prevent short circuits. The compact size makes these SIMs a popular choice for wearables and small portable devices.

  • MFF2 (Machine-to-Machine Form Factor)

Size: 5 mm x 6 mm x 1 mm

This chip form factor is also known as an embedded SIM (eSIM).

SIM Card vs. eSIM

In all 1FF–4FF form factors, the SIM chip is embedded in a dedicated card, which is inserted into and removed from the device via a tray mechanism. With eSIM, however, a vacuum-sealed SIM chip is soldered directly onto a board inside the device. It is also much smaller than either of the removable form factors.

In many use cases, an eSIM incorporates a type of software standard known as eUICC (Embedded Universal Integrated Circuit Card). This allows a single chip to host multiple SIM profiles. It also makes it possible to add, remove, and manage these profiles over the air via a method called Remote SIM Provisioning (RSP).

Note: the use of eUICC is not limited to embedded SIM. You can also deploy it with other SIM form factors. The use of the term eSIM can vary across industries. Some use eSIM to simply mean embedded SIM. Others use eSIM to mean eUICC.

What are the advantages of SIMs?

A SIM card contains all the information a device needs to access a network and for networks to authenticate users, all in one place. This means devices can connect to each other securely and quickly. Strong authentication prevents device cloning. Thanks to the ability to embed SIM cards into the device during manufacturing, it becomes much more difficult to gain unauthorized physical access to the SIM.

  • Global Reach:

If you deploy IoT devices in multiple regions or if the devices are designed to be used on the go, you will have the option of utilizing your network provider's roaming agreements with other carriers. Furthermore, thanks to eUICC, there is also the option of maintaining multiple SIM profiles on the same device, and these devices can be configured to use profiles that best meet business, operational, or regulatory requirements in different parts of the world. In this way, SIMs offer a wide range of options to extend your reach, depending on your cost and coverage preferences.

  • Management:

Thanks to remote SIM provisioning technology, it's possible to switch networks and reconfigure your connectivity settings without needing to physically access your SIMs. This can significantly reduce the time and cost required for device configuration and deployment. With the right SIM provisioning and management platforms in place, it becomes possible to control your connected assets across multiple networks, all from one place.

Which SIM form factors are most suitable for your industry?

In all sectors, connectivity cost preferences and device size are generally the main deciding factors for choosing the SIM form factor.

For example, in consumer-focused applications, Nano SIMs are often a good choice for wearables and other very small equipment, while Micro SIMs may be a good option for home energy meters and other smart home applications.

If your plans involve deploying IoT devices in a variety of regions, an eSIM or eUICC SIM may be an attractive option. All devices can receive the same eSIM at the manufacturing stage, and devices can be remotely provisioned with a relevant profile depending on the target market. This approach can mean faster and cheaper project implementation.

  • Industrial:

For industrial applications, in addition to the size of the connected component and connectivity preferences, it is also important to consider environmental conditions when selecting the appropriate SIM card.

Since it's soldered to the device, an eSIM design can help ensure chip integrity. For removable 2FF–4FF form factors, you can also opt for industrial-grade SIMs. They typically withstand temperatures between -40°C and +105°C. They also have an extended lifespan, reaching up to 15 years in many cases.

  • Automotive:

For use cases like engine telematics and GPS tracking, the appropriate form factor is again determined by connectivity preferences, component size, and environmental conditions. For a dashboard-based tracker, a standard Micro or Nano SIM might be a good option. However, for an engine performance sensor or cooling asset monitor, a specialized automotive SIM might be the best choice. Like the industrial variants, automotive SIMs are designed to operate effectively in harsh environments and extreme temperatures.

For more explanations on IoT, please visit our glossary.