GPRS/GPS – 70g Physical or virtual ignition; digital inputs (configurable); digital output (configurable); -Up Battery: 220mA, Battery Saving Mode > Typical Consumption: 40mA ~60mA / Sleep Mode=6mA / Deep Sleep Mode = less than 2mA; capacity: 1000 positions.

Quadband: GSM850, EGSM900, DCS1800, PCS1900; Class 12 multi-slot GPRS; Compliant to GSM Phase 2/2+ ; Standard USIM interface; 36 x 25 x 100 mm.

Small size; Uses constellations (tracking technologies): GPS (American), Galileo (European Union), BeiDou (Chinese) and Gloness (Russian); It has Stand By levels (sleep mode and Super Sleep Mode) and in Super Sleep mode the electrical consumption is less than 1 mah.

Compact size; Multiple I/OS 1-wire Interface; Scheduled Reports; Geographical fences; Motion detection; Temperature monitoring; Supports Virtual Odometer.

Easy and quick installation; FOTA Updates (Over-The-Air Firmware);Protection factor IP54; Internal antenna; GPRS/2G cellular technology; 3-axis accelerometer; 8 to 33 VDC power supply; Internal battery 450mAh; Positive and negative for installation; Ignition input and lock output.

Small and easy to camouflage; Embarks up to 32 logics (Geo-areas, accelerometer, GSM, SIM etc.); Improper Motion Detection / Towing Alert; After key or virtual ignition; 4 wires – Positive, Negative, Post Key and 1 Free Output; 600 buffered “packets”. Small and easy to camouflage; Embarks up to 32 logics (Geo-areas, accelerometer, GSM, SIM etc.); Improper Motion Detection / Towing Alert; After key or virtual ignition; 4 wires – Positive, Negative, Post Key and 1 Free Output; 600 buffered “packets”.

Compact and smart with Bluetooth connectivity; High gain GNSS and GSM internal antennas; Built-in backup battery; Inputs/outputs extend the device usage scenarios; Digital input for monitoring ignition status, door or alarm button; Remote immobilization of the vehicle using the digital output FMB920; Hot start (< 25s) Cold start (< 35s), Hot motion start (<1s); Accuracy < 2.5M and sensitivity of 165dBM; Reception: 33; External power source; Fault detector; CAN (Controller Area Network) bus data read from the vehicle ECU (Electronic Control Unit) via bluetooth; OBDII – The OBDII Dongle is an accessory that is not part of the combo, and it is necessary to purchase it separately.

Protocol E3 accepted on more than 100 platforms used in the market; Update via OTA (Over The Air); The E3+ equipment can be optimized to the maximum for high and low bandwidth consumption; High Odometer Accuracy 99% with Virtual Ignition and 99,5% with Physical Ignition; Tamper sensor; Low consumption in Sleep Mode; Buffer Memory – 300 positions; External battery reading. Protocol E3 accepted on more than 100 platforms used in the market; Update via OTA (Over The Air); The E3+ equipment can be optimized to the maximum for high and low bandwidth consumption; High Odometer Accuracy 99% with Virtual Ignition and 99,5% with Physical Ignition; Tamper sensor; Low consumption in Sleep Mode; Buffer Memory – 300 positions; External battery reading.

Protocol E3/E3+ (approved + 100 platforms); Update via OTA; Sensor tamper embedded (violation); Embedded magnetic base; Battery with durability up to 1 year; Emergency number storage; Voice monitoring; Shock alert; Smart Economy Mode; Intelligent Economy Fence; Embarked fence; High Speed Alert.

4G connection (LTE CAT1) Fallback (Contingency) for 3G (UMTS) and 2G (GSM) Internal GNSS and LTE antennas Hot start (< 25s) Cold start (< 35s), Hot motion start( <1s) Accuracy < 2.5M and sensitivity of 165dBM Reception: 33; Digital and analog inputs, Configurable negative and impulse Three DOUT outputs Bluetooth and battery backup Ease in Integrations with Accessories Pulse input (fuel flow meter data reading)

Back-Up Battery: 220 mA; Lithium-ion (Li-Ion) with a minimum duration of 8 hours (depends on the configured communication interval); 2 digital inputs (maximum voltage of 40 V); 1 Configurable digital output (maximum current 500mA); Internal GPS antenna; Internal GSM/GPRS antenna; Supply voltage: 8 ~ 40 VDC; Typical Consumption: 40 mA ~60 mA Sleep Mode: 6 mA Deep Sleep Mode: Less than 2mA.

Quick position correction; 2 status indication LED; Real-time tracking; Intelligent data acquisition based on: Time, speed, angle and distance; It sends acquired data via GPRS; Virtual odometer; Lock detection; It is configurable using secure SMS commands; Protection against over voltage.

TRACKING OFFER

Q: SPECIFICATIONS

Protocol E3 accepted on more than 100 platforms used in the market; Update via OTA (Over The Air); The E3+ equipment can be optimized to the maximum for high and low bandwidth consumption; High Odometer Accuracy 99% with Virtual Ignition and 99,5% with Physical Ignition; Tamper sensor; Low consumption in Sleep Mode; Buffer Memory – 300 positions; External battery reading. Protocol E3 accepted on more than 100 platforms used in the market; Update via OTA (Over The Air); The E3+ equipment can be optimized to the maximum for high and low bandwidth consumption; High Odometer Accuracy 99% with Virtual Ignition and 99,5% with Physical Ignition; Tamper sensor; Low consumption in Sleep Mode; Buffer Memory – 300 positions; External battery reading.

Q: SPECIFICATIONS

Protocol E3/E3+ (approved + 100 platforms); Update via OTA; Sensor tamper embedded (violation); Embedded magnetic base; Battery with durability up to 1 year; Emergency number storage; Voice monitoring; Shock alert; Smart Economy Mode; Intelligent Economy Fence; Embarked fence; High Speed Alert.

Q: SPECIFICATIONS

4G connection (LTE CAT1) Fallback (Contingency) for 3G (UMTS) and 2G (GSM) Internal GNSS and LTE antennas Hot start (< 25s) Cold start (< 35s), Hot motion start( <1s) Accuracy < 2.5M and sensitivity of 165dBM Reception: 33; Digital and analog inputs, Configurable negative and impulse Three DOUT outputs Bluetooth and battery backup Ease in Integrations with Accessories Pulse input (fuel flow meter data reading)

Gain full control of your business choosing Arqia connectivity + Trackers

Arqia brings you a complete solution that integrates Equipment and Connectivity.

Now you can hire the best protection for your vehicles in one step!

SPECIFICATIONS
- GPRS/GPS – 70g Physical or virtual ignition;
- digital inputs (configurable);
- digital output (configurable);
- -Up Battery: 220mA, Battery Saving Mode > Typical Consumption: 40mA ~60mA / Sleep Mode=6mA / Deep Sleep Mode = less than 2mA;
- capacity: 1000 positions.

SPECIFICATIONS
- Quadband: GSM850, EGSM900, DCS1800, PCS1900;
- Class 12 multi-slot GPRS;
- Compliant to GSM Phase 2/2+ ;
- Standard USIM interface;
- 36 x 25 x 100 mm.

SPECIFICATIONS
- Small size;
- Uses constellations (tracking technologies): GPS (American), Galileo (European Union), BeiDou (Chinese) and Gloness (Russian);
- It has Stand By levels (sleep mode and Super Sleep Mode) and in Super Sleep mode the electrical consumption is less than 1 mah.

SPECIFICATIONS
- Compact size;
- Multiple I/OS 1-wire Interface;
- Scheduled Reports;
- Geographical fences;
- Motion detection;
- Temperature monitoring;
- Supports Virtual Odometer.

SPECIFICATIONS
- Easy and quick installation;
- FOTA Updates (Over-The-Air Firmware);Protection factor IP54;
- Internal antenna;
- GPRS/2G cellular technology;
- 3-axis accelerometer;
- 8 to 33 VDC power supply;
- Internal battery 450mAh;
- Positive and negative for installation;
- Ignition input and lock output.

SPECIFICATIONS
- Small and easy to camouflage;
- Embarks up to 32 logics (Geo-areas, accelerometer, GSM, SIM etc.);
- Improper Motion Detection / Towing Alert;
- After key or virtual ignition;
- 4 wires – Positive, Negative, Post Key and 1 Free Output;
- 600 buffered “packets”.
- Small and easy to camouflage;
- Embarks up to 32 logics (Geo-areas, accelerometer, GSM, SIM etc.);
- Improper Motion Detection / Towing Alert;
- After key or virtual ignition;
- 4 wires – Positive, Negative, Post Key and 1 Free Output;
- 600 buffered “packets”.

SPECIFICATIONS
- Compact and smart with Bluetooth connectivity;
- High gain GNSS and GSM internal antennas;
- Built-in backup battery;
- Inputs/outputs extend the device usage scenarios;
- Digital input for monitoring ignition status, door or alarm button;
- Remote immobilization of the vehicle using the digital output FMB920;
- Hot start (< 25s) Cold start (< 35s), Hot motion start (<1s);
- Accuracy < 2.5M and sensitivity of 165dBM;
- Reception: 33;
- External power source;
- Fault detector;
- CAN (Controller Area Network) bus data read from the vehicle ECU (Electronic Control Unit) via bluetooth;
- OBDII – The OBDII Dongle is an accessory that is not part of the combo, and it is necessary to purchase it separately.

SPECIFICATIONS
- Protocol E3 accepted on more than 100 platforms used in the market;
- Update via OTA (Over The Air);
- The E3+ equipment can be optimized to the maximum for high and low bandwidth consumption;
- High Odometer Accuracy 99% with Virtual Ignition and 99,5% with Physical Ignition;
- Tamper sensor;
- Low consumption in Sleep Mode;
- Buffer Memory – 300 positions;
- External battery reading.
- Protocol E3 accepted on more than 100 platforms used in the market;
- Update via OTA (Over The Air);
- The E3+ equipment can be optimized to the maximum for high and low bandwidth consumption;
- High Odometer Accuracy 99% with Virtual Ignition and 99,5% with Physical Ignition;
- Tamper sensor;
- Low consumption in Sleep Mode;
- Buffer Memory – 300 positions;
- External battery reading.

SPECIFICATIONS
- Protocol E3/E3+ (approved + 100 platforms);
- Update via OTA;
- Sensor tamper embedded (violation);
- Embedded magnetic base;
- Battery with durability up to 1 year;
- Emergency number storage;
- Voice monitoring;
- Shock alert;
- Smart Economy Mode;
- Intelligent Economy Fence;
- Embarked fence;
- High Speed Alert.

SPECIFICATIONS
- 4G connection (LTE CAT1)
- Fallback (Contingency) for 3G (UMTS) and 2G (GSM)
- Internal GNSS and LTE antennas
- Hot start (< 25s) Cold start (< 35s), Hot motion start( <1s)
- Accuracy < 2.5M and sensitivity of 165dBM
- Reception: 33;
- Digital and analog inputs,
- Configurable negative and impulse
- Three DOUT outputs
- Bluetooth and battery backup
- Ease in Integrations with Accessories
- Pulse input (fuel flow meter data reading)

SPECIFICATIONS
- Back-Up Battery: 220 mA;
- Lithium-ion (Li-Ion) with a minimum duration of 8 hours (depends on the configured communication interval);
- 2 digital inputs (maximum voltage of 40 V);
- 1 Configurable digital output (maximum current 500mA);
- Internal GPS antenna;
- Internal GSM/GPRS antenna;
- Supply voltage: 8 ~ 40 VDC;
- Typical Consumption: 40 mA ~60 mA
- Sleep Mode: 6 mA
- Deep Sleep Mode: Less than 2mA.

SPECIFICATIONS
- Quick position correction;
- 2 status indication LED;
- Real-time tracking;
- Intelligent data acquisition based on:
- Time, speed, angle and distance;
- It sends acquired data via GPRS;
- Virtual odometer;
- Lock detection;
- It is configurable using secure SMS commands;
- Protection against over voltage.